Prolink Software Knowledge Base

Search for articles by entering criteria in the fields below and clicking Search.  
Try our Article Browser to narrow your search results by clicking on Product and Category groups or view a full list of articles in our Full List page.

Results >>
Knowledge Base Article
 Adding a Calculated Characteristic in QC-CALC Real-Time - 4.x
  Guide to adding a Calculated Characteristic to your part file in QC-CALC Real-Time 4.x.
 Adding a Manual Characteristic in QC-CALC Real-Time - 4.x
  Step-by-step guide for adding a manual characteristic to your part file in QC-CALC
 HOW TO: Getting the square root in calculated dimensions
  This article explains creating a square root in the calculation editor
 Adding a Calculated Dimension in QC-CALC Real-Time - 3.x
  How to set up calculated dimensions in QC-CALC Real-Time 3.x
 Adding a Manual Dimension in QC-CALC Real-Time - 3.x
  Adding a manual dimension to a part file in QC-CALC Real-Time v.3.x
 Adding a Manual Dimension in QC-CALC SPC - 3.x
  This explains the entire process for adding a Manual Dimension to a QCC file.
 HOW TO: Set/Change the calculation in your Calculated Dimension
  Setting up a calculated dimension in QC-CALC
 Getting Non-inspected Extra Features into QC-CALC (ver. 3.0 - 3.3)
  How to add Manual Characteristics to your QC-CALC part file
 FAQ: Can I add a calculated dimension to an existing QC-CALC file? (ver. 2.4 or higher)
  This explains how to add a calculated dimension to a part file.